SD1.0/YD-2
Best selling
Best selling
-
M3x15mm Countersunk Socket Screw, 10 pcs -
M3x6mm Titanium Button Head Socket Screw, 5 pcs 
M3x6mm Titanium Button Head Socket Screw, 5 pcs
-
M2.5x4mm Button Head Socket Screws, Pack of 8 
M2.5x4mm Button Head Socket Screws, Pack of 8
-
Rod End Ball S size (6 pcs) Total length 11.3mm / Thread length 4.5mm 
Rod End Ball S size (6 pcs) Total length 11.3mm / Thread length 4.5mm
ZC-206SHARod End Ball S size (6 pcs) Total length 11.3mm / Thread length 4.5mm
¥770（Taxes included.） -
Resin Bevel Gear Diff Unit for YD-2 (Aluminum Drive Cups, Protector Spec, Pre-assembled) -
Resin Gear Differential Unit for YD-2 
Resin Gear Differential Unit for YD-2
-
Suspension Arm Pin Set for YD-2 -
Drift φ1.2x9.5 Coil Unequal Pitch Spring (Yellow) 
Drift φ1.2x9.5 Coil Unequal Pitch Spring (Yellow)
-
Downstop O-rings (8 pcs) -
King Pins for Drift Car Lower Caster Blocks (2 pcs) 
King Pins for Drift Car Lower Caster Blocks (2 pcs)
-
M3x15mm Set Screws (10 pcs) -
Aluminum Servo Mount for YD-2/YD-4 
Aluminum Servo Mount for YD-2/YD-4
-
Universal Drive Shaft for YD-4 -
Front Urethane Bumper for YD-2/YD-4 
Front Urethane Bumper for YD-2/YD-4
-
Drift-use φ1.1x9.5-turn equal-length springs (black) 
Drift-use φ1.1x9.5-turn equal-length springs (black)
-
Ball bearing φ4.0xφ8.0x3.0mm (4 pcs) 
Ball bearing φ4.0xφ8.0x3.0mm (4 pcs)
-
Ceramic Bearing φ5.0xφ10.0x4.0mm (2 pcs) 
Ceramic Bearing φ5.0xφ10.0x4.0mm (2 pcs)
-
Height & Droop Gauge -
Reinforced Bellcrank Post for YD-2/4 
Reinforced Bellcrank Post for YD-2/4
-
Resin Bevel Gear Set for YD-2/PLUS/EX Gear Differential 
Resin Bevel Gear Set for YD-2/PLUS/EX Gear Differential
-
Drift Spring φ1.3x9.5 coils, Equal Length (Green) 
Drift Spring φ1.3x9.5 coils, Equal Length (Green)
-
Aluminum Suspension Mount C for BD8 (46.4–49.6mm) 
Aluminum Suspension Mount C for BD8 (46.4–49.6mm)
-
Maintenance kit for clamp-type wheel hubs -
Titanium 30mm Turnbuckle (by Lunsford)
