DP-180SXA
Discontinued
Skip to product information
DP-180SXA
DP-180SXA
Discontinued
Payment method
- Bank transfer
- Cash on delivery
Hyper-machines featuring racing-car-rivaling tuning and aero parts dive into corners at the edge of their speed limits, performing intense tail slides while being controlled with ease. The breathtaking drift scenes, where the car hits the clipping point while applying counter-steer, are sure to ignite your passion for driving. The Yokomo "Drift Package" series is an electric radio-controlled car assembly kit that reproduces at 1/10 scale (over 40cm) the factory-spec cars seen at the pinnacle of drifting—the D1 Grand Prix (Professional Drift Championship)—as well as more accessible street-spec drift cars.
Equipped with a four-wheel double-wishbone suspension, a high-efficiency shaft-drive full-time 4WD system, and front/rear spool joints, the authentic competition-grade radio-controlled Yokomo "MR-4TC SD CM" chassis, combined with the newly developed "ZERO-ONE R" super drift tires (PAT.P), enables four-wheel drift maneuvers with an overwhelming distance and angle that rivals professional D1 drivers. Just like a real car, you can adjust settings or use optional parts to tune your performance even further, and enjoy twin drifting or group drifting with your friends. The exterior faithfully reproduces powerful aero parts, GT wings, aero mirrors, and the original painting designs of the factory machines. Combining authentic drift performance with the appeal of a display model, the Yokomo "Drift Package" is a precision radio-controlled car that condenses and fully equips the allure of drifting into a 1/10 scale model.
― Main Specifications ―
CHASSIS ZOOM UP
Features a shaft-drive full-time 4WD system that drives the front and rear axles via a shaft. It is characterized by a highly responsive feel that transmits motor power directly. Comes standard with 17 ball bearings to support the drivetrain. This improves throttle response, increases top-end speed, and enhances drive efficiency to extend run times. The front and rear gearboxes are fully sealed. This prevents dirt and small stones from entering even when driving in dusty parking lots, reliably protecting the drivetrain. Equipped with a large urethane bumper on the front to prevent damage to the chassis in the event of a crash. Precision dampers and springs mounted on the front and rear suspension ensure exceptionally high traction. High-precision aluminum oil dampers, sold as options, can also be installed. The front and rear suspensions are double-wishbone style, the same as in real cars, enhancing driving quality with their supple movement. The phenomenal low-center-of-gravity design, inheriting the lineage of racing machines, provides stability at high speeds. The battery tray supports not only the straight-pack batteries included in the running set but also high-power lithium-polymer batteries in rectangular cases. Comes standard with a spur gear cover to protect the gears from small stones and dust kicked up by the tires, allowing you to enjoy driving in parking lots with peace of mind. The upper arms of the front and rear suspension are adjustable turnbuckle types, allowing for stepless camber adjustment by changing their length. Solid axles are used for the differentials housed within the front and rear gearboxes. The initial setup uses a front and rear solid axle combination, which is the easiest to control, with optional ball differentials and front one-way units available. You can change the driving characteristics in various ways depending on the combination. Die-cast aluminum motor mount. Featuring a heat sink fin shape, it efficiently dissipates heat from the motor. The eccentric motor cam allows for fine-tuning of gear mesh.*Photos are assembly reference examples. Actual product may differ. This product is manufactured under license from Nissan Motorsports International Co., Ltd.
詳細
- High-efficiency shaft-drive full-time 4WD system
- High-rigidity composite molded chassis
- Fully adjustable double wishbone suspension
- Turnbuckle tie rods for alignment adjustment
- Rigid axle adopted for drift driving (front & rear)
- Front universal shafts & rear dog bones
- Resin shock absorbers (adjustable damping)
- Front urethane bumper & rear bumper
- Die-cast aluminum clamp-type motor mount
- Spur gear (70T)
- Pinion gear (30T)
- Ball bearings (17 pieces)
- Shaft-drive 4WD system
- Full ball bearings
- Dust-proof sealed gear box
- Large urethane bumper
- Dampers & coil springs
- Double wishbone suspension
- Ultra-low center of gravity design
- Battery tray compatible with various battery types
- Spur gear cover
- Turnbuckle upper arms
- Spool joint
- Die-cast aluminum motor mount
List of items required for driving
- 2チャンネルプロポセット(送信機・受信機・スピードコントローラー・サーボ)View all Running set
- バッテリー(Li-po 2セル、SUB-C 6セル)View all Battery
- 充電器View all Charger
- モーターView all Motor
- ポリカーボネイト用塗料View all Paint