DP-BNAA
Discontinued
Skip to product information
DP-BNAA
DP-BNAA
Discontinued
Payment method
- Bank transfer
- Cash on delivery
With tuning that rivals racing cars and bodies adorned with aero parts, these hyper-machines dive into corners at the ragged edge, sliding their tails violently while being controlled with effortless precision. These exhilarating drift scenes, where the car passes the clipping point while counter-steering, are sure to ignite your passion for driving. The Yokomo "Drift Package" series is a line of 1/10 scale (over 40cm) electric radio-controlled car assembly kits that replicate both the work-spec machines active at the pinnacle of drifting—the D1 Grand Prix (Professional Drift Championship)—and more accessible street-spec drift cars.
Featuring the authentic competition-grade Yokomo "MR-4TC SD CM" chassis—complete with a four-wheel double-wishbone suspension, a high-efficiency shaft-driven full-time 4WD system, and front/rear spool joints—along with the newly developed "Zero One R" (PAT.P) super drift tires, these cars make four-wheel drifting possible with overwhelming distance and angle that rivals professional D1 drivers. You can also adjust the settings just like a real car, polish your driving performance through tune-ups with optional parts, and enjoy tandem or group drifting with friends. The exterior faithfully replicates powerful aero parts, GT wings, aero mirrors, and the original paint designs of the works machines. Combining authentic drift performance with the appeal of a display model, the Yokomo "Drift Package" is a high-quality, fully-equipped radio-controlled car that condenses the allure of drifting into a 1/10 scale.
― Main Specifications ―
CHASSIS ZOOM UP
Adopts a shaft-driven full-time 4WD system that drives the front and rear axles via a shaft. Features a highly responsive feel that delivers motor power directly. Comes standard with 17 ball bearings to support the drivetrain. These improve throttle response, increase top-speed potential, and boost drive efficiency to extend run times. The front and rear gearboxes are completely sealed. This prevents dust and small pebbles from entering, reliably protecting the drivetrain even when driving in dusty parking lots. Equipped with a large urethane front bumper to prevent chassis damage in the event of a crash. Precision dampers and springs mounted on the front and rear suspension ensure exceptionally high traction. High-precision aluminum oil dampers, sold as an option, can also be installed. The front and rear suspension feature a double-wishbone design, just like real cars, providing supple movement that enhances driving quality. The phenomenal low-center-of-gravity design, inherited from racing machine lineage, provides stability during high-speed driving. The battery tray accommodates standard straight-pack batteries included in running sets, as well as high-power LiPo batteries in square cases. A spur gear cover is included as standard equipment to protect the gears from small pebbles and dust kicked up by the tires, allowing you to enjoy driving in parking lots with peace of mind. The upper arms of the front and rear suspension use adjustable turnbuckles, allowing for stepless camber adjustment by changing their length. The differentials located inside the front and rear gearboxes utilize solid axles. The initial configuration uses a front-and-rear solid axle setup for the easiest control, with optional ball differentials and front one-way units available. You can change the handling characteristics in various ways depending on the combination. Aluminum die-cast motor mount. The heat sink fin shape efficiently dissipates heat from the motor, and the eccentric motor cam allows for fine-tuning of gear mesh.※Photos are for assembly reference only. The actual product may differ. This product is manufactured under license from Toyota Motor Corporation.
詳細
- High-efficiency shaft-drive full-time 4WD system
- High-rigidity composite molded chassis
- Full-adjustable double wishbone suspension
- Turnbuckle tie-rods for alignment adjustment
- Rigid axle adopted for drifting (front & rear)
- Front universal shafts & rear dogbones
- Resin shock absorbers (adjustable damping type)
- Front urethane bumper & rear bumper
- Aluminum die-cast clamp-type motor mount
- Spur gear (70T)
- Pinion gear (30T)
- Ball bearings (17 pieces)
- Shaft-drive 4WD system
- Full ball bearings
- Dustproof sealed gearbox
- Large urethane bumper
- Dampers & coil springs
- Double wishbone suspension
- Ultra-low center of gravity design
- Battery tray compatible with various battery types
- Spur gear cover
- Turnbuckle upper arms
- Spool joint
- Aluminum die-cast motor mount
List of items required for driving
- 2チャンネルプロポセット(送信機・受信機・スピードコントローラー・サーボ)View all Running set
- バッテリー(Li-po 2セル、SUB-C 6セル)View all Battery
- 充電器View all Charger
- モーターView all Motor
- ポリカーボネイト用塗料View all Paint