DP-REA7A
Discontinued
Skip to product information
DP-REA7A
DP-REA7A
Discontinued
Payment method
- Bank transfer
- Cash on delivery
With tuning that rivals racing cars and an array of aerodynamic parts, these hyper-machines dive into corners at the very limit of speed, sliding their tails wildly while being controlled with effortless precision. The intense drift scenes, as the cars hit the clipping point with counter-steer applied, are sure to ignite your passion for driving. The Yokomo "Drift Package" series is an electric radio-controlled car assembly kit that reproduces at 1/10 scale (over 40cm long) both the factory-spec machines active at the pinnacle of drifting—the D1 Grand Prix (Pro Drift Championship)—and more accessible street-spec drift cars.
Featuring the authentic competition-grade Yokomo "MR-4TC SD CM" chassis—equipped with four-wheel double-wishbone suspension, a high-efficiency shaft-driven full-time 4WD system, and front/rear spool joints—along with the newly developed "Zero-One R" (PAT.P) super drift tires, these cars make four-wheel drifting possible with overwhelming distance and angle that rivals professional D1 drivers. You can also change settings just like with a real car or polish your driving performance with tune-up option parts, allowing you to enjoy twin drifting or group drifting with your friends. The exterior faithfully reproduces impressive aerodynamic parts, GT wings, aero mirrors, and the original factory machine paint designs. Combining authentic drift performance with the allure of a display model, the Yokomo "Drift Package" is a meticulously crafted radio-controlled car that condenses the full charm of drifting into a 1/10 scale package.
― Main Specifications ―
CHASSIS ZOOM UP
Employs a shaft-driven full-time 4WD system that drives the front and rear axles via a shaft. It is characterized by a responsive feel that transmits motor power directly. Comes standard with 17 ball bearings to support the drivetrain. These improve throttle response, increase top speed, and boost drive efficiency, which also helps extend run times. The front and rear gearboxes are completely sealed. This prevents dust and small stones from entering even when driving in dusty parking lots, ensuring the drivetrain is securely protected. Equipped with a large urethane bumper on the front. This protects the chassis from damage in the event of a collision. Precise dampers and springs mounted on the front and rear suspension ensure exceptionally high traction. High-precision aluminum oil dampers, sold as options, can also be installed. The front and rear suspensions are double-wishbone type, the same style used in real cars. Their supple movement enhances the quality of your drive. The phenomenal low-center-of-gravity design, inherited from racing machine lineage, provides stability during high-speed driving. The battery tray supports not only the straight-pack batteries included in the running set, but also high-power lithium polymer batteries in rectangular cases. Comes standard with a spur gear cover to protect the gears from small stones and dust kicked up by the tires. You can enjoy driving in locations like parking lots with peace of mind. The upper arms of the front and rear suspension are adjustable turnbuckle types, allowing for infinitely variable camber settings by changing their length. The differentials inside the front and rear gearboxes use solid axles. In the initial state, it is configured with the easiest-to-control front and rear solid axle combination, with ball differentials and front one-way units available as options. You can change to various driving characteristics depending on your combination. Motor mount made of die-cast aluminum. Its heat sink fin shape efficiently dissipates heat from the running motor. Gear mesh can also be finely adjusted using the eccentric motor cam.*The photos are for assembly reference only. The actual product may differ. This product has been approved by Mazda Motor Corporation.
詳細
- High-efficiency shaft-drive full-time 4WD system
- High-rigidity composite molded chassis
- Fully adjustable double wishbone suspension
- Turnbuckle-style tie rods for adjustable alignment
- Rigid axle adopted for drift driving (front & rear)
- Front universal shafts & rear dog bones
- Resin shock absorbers (adjustable damping type)
- Front urethane bumper & rear bumper
- Aluminum die-cast clamp-type motor mount
- Spur gear (70T)
- Pinion gear (30T)
- Ball bearings (17 pieces)
- Shaft-drive 4WD system
- Full ball bearings
- Dust-proof sealed gearbox
- Large urethane bumper
- Damper & coil springs
- Double wishbone suspension
- Ultra-low center of gravity design
- Battery tray compatible with various batteries
- Spur gear cover
- Turnbuckle upper arms
- Spool joint
- Aluminum die-cast motor mount
List of items required for driving
- 2チャンネルプロポセット(送信機・受信機・スピードコントローラー・サーボ)View all Running set
- バッテリー(Li-po 2セル、SUB-C 6セル)View all Battery
- 充電器View all Charger
- モーターView all Motor
- ポリカーボネイト用塗料View all Paint