DP-S15A
Discontinued
Skip to product information
DP-S15A
DP-S15A
Discontinued
Payment method
- Bank transfer
- Cash on delivery
Hyper machines featuring racing-grade tuning and aerodynamic parts dive into corners at the ragged edge of speed, kicking the tail out in intense slides while remaining under total control. These thrilling drift scenes, where the car hits the clipping point with perfect counter-steering, are sure to ignite your passion for driving. The Yokomo "Drift Package" series is a line of 1/10 scale (over 40cm) electric radio-controlled car assembly kits that recreate the drift machines seen in the pinnacle of drifting—the D1 Grand Prix (professional drift championship)—as well as more accessible street-spec drift cars.
Equipped with a competition-grade Yokomo "MR-4TC SD CM" chassis featuring four-wheel double-wishbone suspension, a high-efficiency shaft-drive full-time 4WD system, and front/rear spool joints, these cars use the newly developed "Zero-One R" (PAT.P) super drift tires to achieve both the overwhelming distance and angle of a professional D1 driver. Just like a real car, you can adjust the settings or enhance performance with optional parts to further refine your driving, allowing you to enjoy twin drifting or group drifting with friends. The exterior faithfully reproduces impressive aerodynamic parts, GT wings, aero mirrors, and the original paint designs of the works machines. Combining authentic drift performance with the appeal of a display model, the Yokomo "Drift Package" is a meticulously crafted radio-controlled car that condenses the fascination of drifting into a fully equipped 1/10 scale package.
― Main Specifications ―
CHASSIS ZOOM UP
Features a shaft-drive full-time 4WD system that drives the front and rear axles via a propeller shaft. It is characterized by a responsive feel that transmits motor power directly to the ground. Comes standard with 17 ball bearings to support the drivetrain. These improve throttle response, increase top-end speed, and enhance drive efficiency to extend your runtime. The front and rear gearboxes are fully sealed. This prevents dust and small stones from entering even when driving in dusty parking lots, ensuring the drivetrain is fully protected. Equipped with a large urethane front bumper to protect the chassis from damage in the event of a crash. Precision dampers and springs attached to the front and rear suspension ensure exceptionally high traction. High-precision optional aluminum oil dampers are also available for installation. The front and rear suspensions are double-wishbone style, just like those on real cars, enhancing ride quality with supple movement. A phenomenal low-center-of-gravity design inherited from racing pedigree provides stability during high-speed driving. The battery tray supports not only standard straight-pack batteries included in running sets but also high-power Li-Po batteries in rectangular cases. Standard equipment includes a spur gear cover to protect the gears from small stones and dust kicked up by the tires, allowing you to drive in parking lots with peace of mind. The upper arms on the front and rear suspension are adjustable turnbuckle types, allowing for stepless camber adjustments by changing their length. Solid axles are used for the differentials inside the front and rear gearboxes. The initial setup uses a front and rear solid axle combination for the easiest handling, with ball differentials and a front one-way unit available as options. You can change the handling characteristics in various ways depending on the combination. Die-cast aluminum motor mount. The heat-sink fin shape efficiently dissipates heat from the motor, and the eccentric motor cam allows for fine-tuning of gear mesh.*The photos are for assembly reference only. The actual product may differ. This product is manufactured under license from Nissan Motorsports International Co., Ltd.
詳細
- High-efficiency shaft-drive full-time 4WD system
- High-rigidity composite molded chassis
- Fully adjustable double wishbone suspension
- Turnbuckle-style tie rods for alignment adjustment
- Rigid axle (front & rear) suitable for drifting
- Front universal shafts & rear dog bones
- Resin shock absorbers (adjustable damping type)
- Front urethane bumper & rear bumper
- Aluminum die-cast clamp-type motor mount
- Spur gear (70T)
- Pinion gear (30T)
- Ball bearings (17 pcs)
- Shaft-drive 4WD system
- Full ball bearings
- Dustproof sealed gearbox
- Large urethane bumper
- Dampers & coil springs
- Double wishbone suspension
- Ultra-low center of gravity design
- Battery tray compatible with various battery types
- Spur gear cover
- Turnbuckle upper arms
- Spool joint
- Aluminum die-cast motor mount
List of items required for driving
- 2チャンネルプロポセット(送信機・受信機・スピードコントローラー・サーボ)View all Running set
- バッテリー(Li-po 2セル、SUB-C 6セル)View all Battery
- 充電器View all Charger
- モーターView all Motor
- ポリカーボネイト用塗料View all Paint