DP-SDA
Discontinued
Skip to product information
DP-SDA
DP-SDA
Discontinued
Payment method
- Bank transfer
- Cash on delivery
With tuning that rivals racing cars and aggressive aero styling, these hyper machines dive into corners at the ragged edge, sliding their tails wildly while under precise control. The thrill of watching them counter-steer through the clipping point is sure to ignite your passion for driving. The Yokomo "Drift Package" series is an electric radio-control car assembly kit that reproduces the drift machines seen at the pinnacle of drifting—the D1 Grand Prix (professional drift championship)—as well as more accessible street-spec drift cars, all in 1/10 scale (over 40cm long).
Featuring the authentic, competition-grade Yokomo "MR-4TC SD CM" chassis—complete with four-wheel double-wishbone suspension, a high-efficiency shaft-driven full-time 4WD system, and front/rear spool joints—along with the newly developed "Zero-One R" (PAT.P) super drift tires, these cars achieve the incredible drift distances and angles of professional D1 drivers. Just like real cars, you can adjust the settings and tune the performance with optional parts to further sharpen your driving. You can also enjoy tandem or group drifting with your friends. The exterior faithfully reproduces impressive aero parts, GT wings, aero mirrors, and the original paint schemes of factory racing machines. Combining authentic drift performance with the appeal of a display model, the Yokomo "Drift Package" is a meticulously crafted radio-control car that condenses the full allure of drifting into a 1/10 scale package.
― Main Specifications ―
CHASSIS ZOOM UP
Features a shaft-driven full-time 4WD system that drives both front and rear axles via a shaft, providing a direct, responsive feel that delivers motor power efficiently. Standard-equipped with 17 ball bearings to support the drivetrain, improving throttle response, increasing top speed, and enhancing drive efficiency for longer run times. The front and rear gearboxes are fully sealed, preventing dust and small stones from entering even when driving in dusty parking lots, ensuring the drivetrain remains protected. Equipped with a large urethane front bumper to protect the chassis from damage in the event of a crash. Precision dampers and springs on the front and rear suspension ensure exceptionally high traction. High-precision aluminum oil dampers are also available as optional upgrades. Both front and rear suspension use a double-wishbone design identical to that of real cars, offering supple movement for a higher quality of driving. The remarkably low center of gravity design, inherited from a lineage of racing machines, provides stability during high-speed driving. The battery tray supports not only standard stick packs included in running sets but also high-power, rectangular-cased lithium-polymer batteries. Includes a standard spur gear cover to protect gears from pebbles and dust kicked up by the tires, allowing you to drive in parking lots with peace of mind. The upper arms of the front and rear suspension are adjustable turnbuckle types, allowing for infinite camber adjustment by changing their length. The differentials inside the front and rear gearboxes use solid axles. In the default configuration, the front and rear solid axle setup offers the easiest handling; optional ball differentials and front one-way units are available. You can change the handling characteristics depending on the combination. Die-cast aluminum motor mount. The heat-sink fin design efficiently dissipates heat from the motor, and the eccentric motor cam allows for fine-tuning of gear mesh.*The photos are for assembly reference only. The actual product may vary. This product is manufactured under license from Toyota Motor Corporation.
詳細
- High-efficiency shaft-drive full-time 4WD system
- High-rigidity composite molded chassis
- Full-adjustable double wishbone suspension
- Turnbuckle-style tie rods for adjustable alignment
- Rigid axles for drift driving (front & rear)
- Front universal shafts & rear dog bones
- Resin shock absorbers (damping adjustable type)
- Front urethane bumper & rear bumper
- Die-cast aluminum clamp-type motor mount
- Spur gear (70T)
- Pinion gear (30T)
- Ball bearings (17 pcs)
- Shaft-drive 4WD system
- Full ball bearings
- Dust-proof sealed gearbox
- Large urethane bumper
- Dampers & coil springs
- Double wishbone suspension
- Ultra-low center of gravity design
- Battery tray compatible with various battery types
- Spur gear cover
- Turnbuckle upper arms
- Spool joint
- Die-cast aluminum motor mount
List of items required for driving
- 2チャンネルプロポセット(送信機・受信機・スピードコントローラー・サーボ)View all Running set
- バッテリー(Li-po 2セル、SUB-C 6セル)View all Battery
- 充電器View all Charger
- モーターView all Motor
- ポリカーボネイト用塗料View all Paint